在模具上均匀涂上脱模剂和胶衣树脂，然后铺放增强材料，用压辊及毛刷涂覆混有固化剂的树脂，使树脂浸渍增强材料并驱除气泡，铺层操作反复进行直至达到制品的设计厚度，然后在常温或加热条件下固化成型。
The mold is evenly coated with release agent and gelcoat resin, and then the reinforcing material is laid. The resin mixed with curing agent is coated with a press roller and a brush to impregnate the reinforcing material and remove bubbles. The laying operation is repeated until the design thickness of the product is reached, and then the molding is solidified under normal temperature or heating condition.
玻璃纤维无捻粗纱布
Woven Roving
适用于各种增强树脂，如UP、VE、EP和PF等。幅宽50mm-3000mm，单位面积质量范围260g/m2-1600g/m2，特殊规格可根据客户要求生产。Compatible with UP, VE and PF resins. Available with a width range of 50-3000mm and a weight range of 260g/m2-1600g/m2. Other specifications are also available on customer request.
无碱玻璃纤维乳剂短切原丝毡
Emulsion Chopped Strand Mats
由玻璃纤维原丝经短切后，随机无定向均匀平铺，然后用乳剂粘结剂粘结在一起而制成的片状毡片。可使用于增强UP和VE等。幅宽范围200mm-3120mm，特殊规格可根据客户要求生产。
Made of randomly distributed chopped strands held together by an emulsion binder. They are compatible with UP and VE resins. The roll width ranges from 200mm to 3120mm. Special requirements may be available upon request.
无碱玻璃纤维粉剂短切原丝毡
Powder Chopped Strand Mats
由玻璃纤维原丝经短切后，随机无定向均匀平铺，然后用粉剂粘结剂粘结在一起而制成的片状毡片。可适用于增强不饱和聚酯、乙烯基树脂、环氧树脂和酚醛树脂等。产品幅宽范围200mm-3120mm，可根据客户的使用要求和习惯，提供不同浸透和分解时间要求的产品。
Made of randomly distributed chopped strands held together by a powder binder. They are compatible with UP, VE, EP and PF resins. The roll width ranges from 200mm to 3120mm. Additional demands on wet-out and decomposition time may be available upon request.
玻璃纤维无捻粗纱布Woven Roving
| 产品认证 Certification | 认证产品规格 Product Code | 证书号 Certificate No. |
| 挪威船级社(DNV) | EWR270 EWR360 EWR580 EWR600 EWR800 | TAK00001TH |
| 英国劳氏船级社(LR) | EWR270 EWR360 EWR580 EWR600 EWR800 | LR2002408ALP LR2002409ALP LR2002410ALP LR2002411ALP LR2002412ALP |
无碱玻璃纤维粉剂短切原丝毡Emulsion Chopped Strand Mats
| 产品牌号 Product Code | 单位面积克重(g/m2) Area Weight | 典型幅宽(mm) Typical Width | 适用树脂 Resin Compatibility | 产品特点 Product Features |
| E01 | 225,300,450,600,900 | 1040,1270 | 聚酯树脂， 乙烯基树脂 UP, VE | 拉伸强度高，适用于生产面积较大的产品，操作时无飞扬，树脂浸穿性好,浸透速度快，气泡容易排除，制品机械强度高，具有优异的耐酸腐蚀性 High tensile strength, allowing for use in hand lay-up process to produce large-area parts, no airborne fiber when operating, good wet-through and fast wet-out in resins, rapid air lease, high mechanical strength, superior acid corrosion resistance. |
| E10 | 225,300,450,600,900 | 1040,1270 | 聚酯树脂， 乙烯基树脂 UP, VE | 辊压排泡性非常好，树脂含量低 Rapid air lease reducing rolling out times, low resin consumption. |
| E20 | 225,300,450,600,900 | 1040,1270 | 聚酯树脂， 乙烯基树脂 UP, VE | 覆模性好，树脂浸穿性好，浸透速度快，气泡容易排除，减少辊压次数,树脂消耗少，制品机械强度高，优异的耐酸腐蚀性 Good moldability, good wet-through and fast wet-out in resins, rapid air lease reducing rolling out times and increasing productivity, low resin consumption, high mechanical strength of composite products, superior acid corrosion resistance. |
无碱玻璃纤维粉剂短切原丝毡Powder Chopped Strand Mats
| 产品牌号 Product Code | 单位面积克重(g/m2) Area Weight | 典型幅宽(mm) Typical Width | 适用树脂 Resin Compatibility | 产品特点 Product Features |
| P02 | 225,300,450,600,900 | 1040,1270 | 聚酯树脂， 乙烯基树脂， 环氧树脂 UP, VE, EP | 拉伸强度高，适用于手糊工艺生产面积较大的制品,树脂浸穿性好,浸透速度快，气泡气容易排除，制品机械强度高，优异的耐酸腐蚀性能 High tensile strength, suitable for use in hand lay-up process to produce large-area parts, good wet-through and fast wet-out in resins, rapid air lease, high mechanical strength |
| P20 | 225,300,450,600,900 | 1040,1270 | 聚酯树脂， 乙烯基树脂， 环氧树脂 UP, VE, EP | 毡质柔软，覆模性好，方便手工撕裂，树脂浸穿性好，浸透速度快，气泡容易排除，减少辊压次数，树脂消耗少，制品机械强度高，优异的耐酸腐蚀性能 Soft mat, ease of manual tearing apart, good conformability, good wet through and fast wet-out in resins, rapid air release reducing rolling out times and increasing productivity, low resin consumption, high mechanical strength of composite products, superior acid corrosion resistance |
| 产品认证 Certification | 认证产品规格 Product Code | 证书号 Certificate No. |
| 挪威船级社(DNV) | EMC300 EMC450 EMC600 EMC900 | TAK00001TJ |
| 英国劳氏船级社(LR) | EMC225(E) EMC300(E) EMC450(E) EMC600(E) | MAST/3490/2 |
| 英国劳氏船级社(LR) | EMC300(P) EMC450(P) EMC600(P) EMC900(P) | LR2002414LP |
