将配制好的树脂涂覆到匀速运行的薄膜上,通过刮刀来控制树脂的厚度,再将短切的玻璃纤维原丝均匀分布到树脂上,经过浸渍后将上膜覆盖在树脂糊上,进入一定温度和装有模具的烘箱进行固化和成形。
A resin mix is uniformly deposited in a controlled amount onto a moving film at a constant speed. The thickness of the resin is controlled by the draw-knife. Fiberglass roving is chopped and uniformly distributed onto the resin. Then a top film is applied forming a sandwich structure. The wet assembly travels through a curing oven to form the composite panel.
透明板材用无碱玻璃纤维合股无捻粗纱
Assembled Panel Rovings
经涂覆硅烷基浸润剂,适用于不饱和聚酯树脂、亚克力树脂,具有良好的短切性和分散性,能在树脂中快速彻底浸透。
Coated with a silane-based sizing and compatible with UP and acrylic resins. They can fast wet-out in resin and deliver excellent dispersion after chopping.
产品牌号 Product Code | 典型线密度(tex) Nominal Linear Density | 产品特点 Product Features | 适用树脂 Resin Compatibility | 典型应用 Typical Application |
838 | 2400,3200,4800 | 低静电,浸透快,无白丝 Low static, fast wet-out, no white fibers | 不饱和聚酯树脂 UP | 通用型透明FRP板材 General purpose transparent FRP panels |
872 | 2400,3200,4800 | 浸透极快,无白丝,透明度高 Extremely fast wet-out, no white fibers, superior transparency | 不饱和聚酯树脂,亚克力树脂 UP, PM, MA | 透明性要求苛刻的FRP板材 High transparency FRP panels |
872S | 2400,3200,4800 | 低静电,浸透适中,在低张力下,短切分散性优良 Low static, moderate wet-out, excellent dispersion after chopping under low tension | 不饱和聚酯树脂,亚克力树脂 UP, PM, MA | 半透明和不透明FRP板材 Semi-transparent and opaque FRP panels |
无碱玻璃纤维粉剂短切原丝毡
Powder Chopped Strand Mats
由玻璃纤维原丝经短切后,随机无定向均匀平铺,然后用粉剂粘结剂粘结在一起而制成的片状毡片。可适用于增强不饱和聚酯、乙烯基树脂、环氧树脂和酚醛树脂等。产品幅宽范围200mm-3120mm,可根据客户的使用要求和习惯,提供不同浸透和分解时间要求的产品。
Made of randomly distributed chopped strands held together by a powder binder. They are compatible with UP,VE,EP and PF resins. The roll width ranges from 200mm to 3120mm.Additional demands on wet-out and decomposition time may be available upon request.
产品牌号 Product Code | 单位面积克重(g/m2) Area Weight | 典型幅宽(mm) Typical Width | 适用树脂 Resin Compatibility | 产品特点 Product Features |
P02 | 225,300,450,600 | 1040,1270 | 不饱和聚酯树脂,乙烯基树脂, 环氧树脂 UP, VE, EP | 拉伸强度高,工艺性能好,适用于生产半透明或不透明FRP板 High tensile strength, good processing, suitable for use in semi-transparent and opaque FRP panels |
P30 | 225,300,450,600,900 | 1040,1270 | 不饱和聚酯树脂, 乙烯基树脂, 环氧树脂 UP, VE, EP | 浸透速度快,适用于生产透明性要求高的板材 Fast wet-out, suitable for use in high translucent panels |